wire mesh conveyor belt for furnace by Qingdao Hexin Machinery Co.,Ltd.

 The mesh belt temperature of the quenching furnace is around 900-1120 degrees. The mesh belt is preferably made of 310S and SUS314. After the workpiece is quenched, it needs to be tempered. 

The tempering temperature is around 350-650. A 304 mesh belt can be selected. Tempering is about 350-650 degrees and annealing is about 500-600 degrees.

Material selection is also dependent on processing conditions, but generally those shown below are selected for continuous conveying at elevated temperatures of 600 to 1150 deg C.

25/20 AISI 314 stainless steel, Ni-Cr 37/18, Ni-Cr 37/18 Cb, Ni-Cr 80-20, Inconel 600 & 601

The belt has following types: EDGE SUPPORT ONES, STAND-OFF ONES,etc. 
The wire mesh belts are widely used in carbon nitriding, continuous ovens for heat treatment, hardening, normalizing, sintering and brazing, solution heat-treatment


Comments

Popular posts from this blog

investment casting trays by Qingdao Hexin Machinery Co.,Ltd.

Stackable grids for pusher furnace by Qingdao Hexin Machinery Co.,Ltd.

Centrifugally spun cast radiant tubes with ASTM A351 HK40 stainless steel