Y refractory anchor by Qingdao Hexin Machinery Co.,Ltd.
Y refractory anchor are mostly used in the furnace wall of the kiln, and
The most commonly used anchor is mostly used for single-layer thermal insulation structures. Because of its good performance, it has been very popular. However, due to the large number of 'hot bridges' (mainly due to the dense arrangement of Y-shaped refractory anchor, and the two points of one anchor are relatively close to the hot surface and the heat dissipation is large), it is gradually being mixed with other pot fixtures. Use to reflect its good fixing performance and use performance
The anchors are made from stainless steel 1.4301 (304), 1.4845 (310), 1.4401 (316) and Inconel 601,nickel chrome alloys which give good oxidation and scaling resistance at elevated temperatures.
Ω type refractory lock pin anchor specifications: diameter 4mm ~ 24mm, height 20mm ~ 450mm, plate refractory lock pin anchor plate thickness 2mm ~ 10mm, width 10mm ~ 40mm, height 20 ~ 450mm.
Note: special materials and special specifications can be customized.
Shape and use: General Y-type anchors are suitable for furnaces, V-type anchors are resistant to high temperature environments, Ω-type anchors are petrochemical, cement anchors, U-type anchors are suitable for pipes.
The anchors are made from stainless steel 1.4301 (304), 1.4845 (310), 1.4401 (316) and Inconel 601,nickel chrome alloys which give good oxidation and scaling resistance at elevated temperatures.
Comments
Post a Comment